Confi guring Lucca
Theft protection
In the Anti-Theft Protection menu, you
can assign a PIN and a PUK to the Lucca
to protect it against unauthorised use.
The PIN can be changed at any time. Register un-
der http://puk.blaupunkt.de to securely store
your PUK.
For further details, read the chapter "Performing
basic settings", "Activating the PIN query".
Factory settings
In the Factory settings menu, you can reset the
navigation software to the factory settings.
Note:
If you reset the Lucca to the factory settings,
your personal settings and stored destina-
tions are deleted.
u
Touch the symbol on the second
page of the Settings menu.
The Factory Settings menu is displayed.
u
Touch the symbol to reset the set-
tings to the factory settings.
- or -
u
Touch the symbol to cancel the oper-
ation.
Calibrating the touchscreen
You can recalibrate (align) the touchscreen if it re-
sponds imprecisely to touches.
u
On the second page of the Settings
menu, touch the symbol to start the
calibration.
u
Follow the instructions on the display to cali-
brate the touchscreen.
Product information
u
Touch the symbol on the second
page of the Settings menu.
Product information about the Luc-
ca, such as the version of the map used and
the navigation software, are displayed.
36
Demo mode
u
On the second page of the Settings
menu, touch the symbol to switch
the demo mode on (check mark) or
off (no check mark).
If you activated the demo mode, the Lucca
switches to demo mode after 5 minutes of
inactivity.
Settings for navigation
You can perform settings of the Lucca in the navi-
gation menu for the following areas:
•
Home address
•
Continuing the tour automatically
•
Selecting a dataset
•
POI note
•
Voice instructions
•
Units
u
Touch the symbol in the main menu
of the Lucca.
The map is displayed.
u
Touch the symbol.
The Navigation menu is displayed.
u
Touch the symbol.
The Settings menu is displayed.
If you performed changes to the settings:
u
Touch the button to exit the menu.
Home address
You should enter your home address to
quickly navigate home from any location.
For further details, read the chapter "Per-
forming basic settings", "Entering the home ad-
dress".
Continuing a tour automatically
For tours with several interim destinations, you
can specify whether the next destination is au-