Additional Functions During The Route Guidance; Entering A Blocking; Cancelling Route Guidance; Skipping The Next Destination - Blaupunkt TravelPilot Lucca 3.5 Operating And Installation Instructions

Additional functions during the
route guidance
Prerequisite:
• Route guidance
- or -
• Route simulation (demo)
u
Touch any position on the map to display ad-
ditional functions.
The Route Guidance Options add-on menu is
displayed.
The following functions are now available:
–

Entering a blocking

–

Cancelling route guidance

–

Skipping the next destination

– Display information about the destina-
tion
– Display route list
Entering a blocking
During the route guidance, you can block the route
segment lying ahead of you. An alternate route is
calculated and the blocked partial route is by-
passed.
u
Touch the symbol in the add-on
menu.
The Traffi c Jam Ahead menu is dis-
played.
In this menu, you can select the length of the
blocking, starting with your current position.
u
Touch the buttons to enter
the length of the blocking.
u
Touch the OK button.
The route is recalculated and the blocked
route segment is evaded.

Additional functions during the route guidance

The symbol identifi es the blocking. The
!
blocked segment is marked in red.
To cancel the blocking:
u
In the add-on menu, touch the sym-
bol again (the check mark indicates
that a blocking has been entered).
A confi rmation is displayed.
u
Touch Yes to delete the blocking.
The route is being recalculated.
- or -
u
Touch No in order to not delete the blocking.
Cancelling route guidance
u
Touch the symbol in the add-on
menu.
A confi rmation is displayed.
u
Touch Yes to quit the route guidance.
The map is displayed.
- or -
u
Touch No to continue the route guidance.
Skipping the next destination
Prerequisite:
• Tour planning (route with at least 1 interim
destination)
u
In the add-on menu, touch the sym-
bol to skip the next interim destina-
tion.
The route is recalculated and the next destina-
tion is approached.
Display information about the
destination
u
Touch the symbol in the add-on
menu.
The destination address with infor-
mation about distance and arrival or
remaining driving time is displayed.
The destination can be displayed on the map:
u
Touch the Show In Map button.
u
Touch the symbol to exit the map
view again.
29