Scope Of Delivery; Placing The Device In Operation; Theft Protection; Switching On/Off - Blaupunkt PHILADELPHIA 845 Operating Instructions Manual

Scope of delivery

The scope of delivery includes:
• Car sound system
• Remote control (incl. battery)
• TMC tuner (only for devices with Europe navigation)
• microSD card with navigation data in the microSD
card slot (only for devices with navigation)
• GPS antenna
• External Bluetooth microphone
• Getting started
• Small parts set
• Installation material
• Connecting cable

Placing the device in operation

Caution!
Transport securing screws
Ensure that the transport securing screws at the top side
of the device are removed before the startup of the de-
vice.
Note:
The device features an integrated CAN interface with
which it can be integrated into the in-vehicle data
communication for selected vehicles. With this in-
tegration, the display (provided that the equipment
features are pre-installed in the vehicle) automatical-
ly switches to parking mode during parking. During
the operation of the air-conditioning system, the set-
tings are shown on the display of the car sound sys-
tem. The audio/video sources can be operated con-
veniently and safely via the steering wheel-mounted
controls.
02_Philadelphia845_gb.indd 29 02_Philadelphia845_gb.indd 29
Scope of delivery | Startup

Theft protection

This car sound system is protected against theft with a
four-digit code number (code number is factory-set to
0000).
If the code query is activated, the code number must
be entered after every interruption of the power supply
from the vehicle battery.
Note:
In the General submenu of the settings menu, you
can activate/deactivate the code query and change
the code number.
Entering the code number after a voltage
interruption
If the code number is required, a keypad for entering the
code number is displayed.
u Enter the code number via the keypad.
u Press the [
] button to confi rm the entry.
The device is switched on.
Note:
If you entered an incorrect code number, the display
briefl y shows Security code incorrect!. Afterwards,
you can repeat the code entry.

Switching on/off

Switching on/off with the rotary/pushbutton
u For switch-on, press the left rotary/pushbutton
u For switch-off , hold the left rotary/pushbutton
pressed for more than 2 seconds.
Switching on/off via vehicle ignition
If the car sound system is connected with the vehicle
ignition and it was switched off with the left rotary/push-
5
button , it is switched on or off with the ignition.
5
.
5
29
27.08.14 14:10 27.08.14 14:10