Removing The Lucca; Removing The Suction Cup Holder; Switching On/Off; Switch-On - Blaupunkt TravelPilot Lucca 3.5 Operating And Installation Instructions

Table of Contents

Advertisement

Removing the Lucca

u
Hold the Lucca in both hands and press
against the clamp with your thumbs.
u
Pull the Lucca up and out of the clamp.

Removing the suction cup holder

If you change vehicles, you can simply remove the
support.
u
Push the lever on the support away from the
glass.
u
Carefully loosen the suction cup at the edge
from the glass so that air can enter between
suction cup and glass.
u
Carefully pull the suction cup off of the glass.
Installation in the vehicle | Switching on/off

Switching on/off

The On/Off switch is used to switch the Lucca on
and off and to open the main menu.

Switch-on

u
Press and hold the On/Off switch for longer
than 3 seconds.

Switching off

u
Press and hold the On/Off switch for longer
than 3 seconds.
The Lucca is fi rst placed in idle state and re-
mains ready for operation. All functions will
be completely switched off after 20 minutes.
Note:
The Lucca continues to use a small amount of
energy even if it is switched off. If you use the
Lucca again after an extended period of time,
it may be necessary to recharge the battery.

Reset

If the Lucca does not work properly, a simple reset
may help.
u
Press and hold the On/Off switch for longer
than 14 seconds.
The Lucca is switched off.
u
Press and hold the On/Off switch for longer
than 3 seconds.
The Lucca is restarted.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents