Working With The Map; Showing A Map; Moving And Scaling The Map; Touching The Map - Blaupunkt TravelPilot Lucca 3.5 Operating And Installation Instructions

Working with the map

Working with the map

Showing a map

u
Touch the symbol in the main menu
of the Lucca.
To change to the map display from the Navigation
menu:
u
Touch the button.

Moving and scaling the map

To view the desired destination area on the map,
you can move the map section and scale it (zoom
in and zoom out).
u
Touch one of the symbols to
zoom in or out of the map.
u
Touch the map and move the map in the de-
sired direction.
u
Touch the button to return to your
current position.

Touching the map

u
Touch a location (the street or the point of in-
terest) in the map.
The city is selected and its name appears
in the lower display bar.
u
Touch the button to call up the add-
on menu.
u
Touch the symbol to adopt the city as
the destination.
The route guidance is being started.
Note:
If you touch any place in the map during the
route guidance, an add-on menu with addi-
tional functions is displayed. For further de-
tails, read the chapter "Additional functions
during the route guidance".
- or -
u
Touch the symbol to store the loca-
tion and use it as destination at a lat-
er time.
The keyboard is displayed.
26
u
Enter a name for the destination and touch
OK.
The destination is stored in the Favourites
under the name entered. (Ch. "Managing des-
tinations")

Buttons

In the map view, the following buttons are avail-
able:
u
Touch the symbol to reach the
Navigation menu.
u
Touch the symbol to reach the Map
Settings menu.

Performing map settings

u
Touch the symbol in the map view.
The Map Settings menu is displayed.
u
Touch the symbol to change between
day and night display or to activate
the automatic function.
If you activate the automatic function, Lucca
automatically switches to day or night mode if
the lighting conditions change. The sensitivity
of the light sensor can be adjusted (ch. "Con-
fi guring Lucca", "Device settings").
u
/
u
/ Touch the symbol to change
the map orientation be-
tween driving direction and
direction North.
u
Touch the symbol to change these
settings for the speed limit:
– Touch the symbol to show (check
mark) or hide speed warnings
(no check mark) on the map.
– Touch the symbol to switch the
warning beep on (check mark)
or off (no check mark).
Touch the symbol to
change between 2D and
3D view.