Related Manuals for Beta Three S1200Na
Summary of Contents for Beta Three S1200Na
- Page 1 S1200Na USER MANUAL ED-B3-MA-070308-001...
- Page 2 CONTENTS PRODUCT FEATURES SPECIFICATION ACOUSTIC FEATURES AMPLIFICATION MODULE CONTROL SOFTWARE INSTALLATION DIMENSIONS SAFETY INFORMATION WARRANTY...
-
Page 3: Product Features
S1200Na PRODUCT FEATURES Two transducers 2.1 way full range plastic speaker, coaxial components, computer simulation design. Compact, high sensitivity, big power active full range plastic speaker. All transducers with horn loading. Built in DSP amplifier, all parameters of speaker can be precisely adjusted according to user's own style through RS232 connector with computer. - Page 4 S1200Na FREQUENCY RESPONSE 1 2 0 D e g 1 1 0 1 0 0 - 36 - 108 - 180 PHASE RESPONSE 1 4 0 D e g 1 1 0 - 36 - 108 - 180 - 1 0...
- Page 5 S1200Na WATERFALL - 10 - 15 - 20 - 25 1 50 2 00 50 0 1 0K 2 0K 110.0 D e g dBSPL 100.0 90.0 80.0 - 36 70.0 - 108 60.0 - 180 Frequency Response 2nd Distortion...
- Page 6 S1200Na HORIZONTAL DIRECTIVITY The data of S1200Na horizontal directivity were collected by testing the speaker system in a big anechoic chamber. 100Hz 160Hz 200Hz 400Hz 630Hz 1.0kHz 1.6kHz 2.5kHz 3.15kHz 6.3kHz 10kHz 16kHz The scale is stepped by 6dB increment.
- Page 7 S1200Na VERTICAL DIRECTIVITY The data of S1200Na vertical directivity were collected by testing the speaker system in a big anechoic chamber. 100Hz 160Hz 200Hz 400Hz 630Hz 1.0kHz 1.6kHz 2.5kHz 3.15kHz 6.3kHz 10kHz 16kHz The scale is stepped by 6dB increment.
- Page 8 S1200Na AMPLIFICATION MODULE DSP ACTIVE AMPLIFIER S 1200Na POWER:350W+300W ACTIVE 3 WAY FULL RANGE ELECTRONIC COMPENSATION SPEAKER PEAK VOLUME LINE INPUT LINE INPUT LINE OUTPUT LINE OUTPUT RS-232 RS-232 Beta Three This series of products are authorized to be produced by...
- Page 9 S1200Na SOFTWARE OPERATION INSTRUCTIONS HOW TO GET THE CONTROL SOFTWARE The software is burned into the accessory disk which delivered with unit,or you can download it from our web site. SOFTWARE SETUP It requires Windows98 or senior operation system, display solution ratio should be over 800*600, at least with standard Rs232 series interface or one USB interface.
- Page 10 S1200Na SOFTWARE OPERATION INSTRUCTIONS 2> PROGRAM OPERATION MENU By clicking the correct menu subdirectory, you can adjust the concerned parameters. You can check present program number, name, edit current program, All information must be under online situation. [List Program & Recall]...
- Page 11 S1200Na SOFTWARE OPERATION INSTRUCTIONS [Save As Current Program In Device] Save the parameter you adjusted as a program of unit, then new program can be used as default data when turn on unit. See right: 3> ONLINE OPERATION MENU [Enable Communications]...
- Page 12 S1200Na SOFTWARE OPERATION INSTRUCTIONS 4> FILE OPERATION MENU Open and store PC data to appointed disk directory. 5> FUNCTION MODULE OPERATION 5.1> Input channel parameter configuration (MIC channel for example, LINE channel is same) 5.1.1> MIC input PEG configuration: Use mouse to click the main MIC PEG button into red, display interface:...
- Page 13 S1200Na SOFTWARE OPERATION INSTRUCTIONS Choose filter type: Click filter series number, "1" or "2", then click "Type" pull-down menu,it will shows as following interface. They are: None(No using filter. Direct-pass), Peacking, Bandpass, Hi-shelf, Lo-shelf, Notch 6 filters types to select.Select correct filter type, then select right frequency, bandwidth and level, finally you can get the perfect performance.
- Page 14 S1200Na SOFTWARE OPERATION INSTRUCTIONS 5.2> Parameter configuration of output channel(only the HF output channel as a sample, the LF channel is same) 5.2.1> Crossover setting, press the HPF/LPF button, it will be changed to red. The displaying is like the following: The interface of filter type, BUTTER WORTH,BESSEL.LINKWITZ-RILEY are available for high pass and low pass.
- Page 15 S1200Na SOFTWARE OPERATION INSTRUCTIONS 5.2.2> PEQ of output setting, press PEQ button of HIGH channel, the following interface will be showed:The setting method is same as the input channel, there is 6 PEQ available to be adjusted. 5.2.3> Output gain adjust(including phase), press LEVEL button, the gain interface is as following: Dragging the gain button with mouse can enhance or reduce the channel level, press the phase at the left of gain button can get the INVERSE or Normal.
- Page 16 S1200Na SOFTWARE OPERATION INSTRUCTIONS 5.2.4> Dynamic range control Press DRC button(or COMPRESSSION/LIMIT), the interface is as following:This compression just check the HF signal, once the signal reach the limit, it will compress the HF and LF synchronously(synchronous action is for the balance of HF and LF)
- Page 17 S1200Na INSTALLATION DIMENSIONS 416mm 280mm Planform Front view 423mm Side view Back view...
-
Page 18: Safety Instructions
S1200Na Speakers are guaranteed against malfunction due to defects in materials or workmanship for a period of three (3) years from the date of original purchase. - Page 19 S1200Na www.elderaudio.com...