Advertisement
S1200Na
SOFTWARE OPERATION INSTRUCTIONS
HOW TO GET THE CONTROL SOFTWARE
The software is burned into the accessory disk which delivered with unit,or you can download it from our web site.
SOFTWARE SETUP
It requires Windows98 or senior operation system, display solution ratio should be over 800*600, at least with
standard Rs232 series interface or one USB interface. The software only include one practical file, you can
run this file.
EQUIPMENTS CONNECTING
Connect the unit with PC computer through RS232. If PC have no RS232 connector, but have USB interface,
you can use "RS232/USB" transferring cable(optional part) to connecting it.
SOFTWARE OPERATION
1> Software display screen as following interface:
Input signal MIC, MUSIC is available for PEQ, LEVEL adjustment. When the LF and LF overlapped, you can
adjust the HPF/LPF, PEQ, LEVEL, Dynamic Range Control and Delay functions perfectly.
System module
Information
REMARKS:
Before unit connected, you can operate the file(open/edit or store), in order to run and operate when connecting
(you can download the data from PC to unit).
7
Advertisement
