SAFETY INSTRUCTIONS PLEASE READ THIS MANUAL FIRST Thanks for buying products. Read this manual first as it will help you operate the system properly. Please keep this manual for future reference. WARNING: This product must be installed by professionals. When using the hanging and rigging parts that are not appointed, please ensure the intensity of the structure comply with the local safety criterion.
CONTENT MU series professional loudspeaker system CONTENT INTRODUCTION Features Description Applications CONNECTION Terminal Plate NL4 Connection System Connection Reference Loudspeaker Connection INSTALLATION Installation Accessories Installation Reference TECHNICAL SPECIFICATION Technical Sheet Frequency Response And Impedance Curve 2D Dimension Product information subjects to be updated without notification, please visit www.elderaudio.com for the latest update.
The sound is very clean, powerful and stretchy. Description Description Applications MU8 is a very compact design active speaker integrated multifunctional hall the coaxial transducer.It consists of one 8" Neodymium woofer small hall with 34MM voice coil and one 1.4" compression driver . The rated power is 150W.
CHB GND PIN 2 - : BRIDGE MONO OUTPUT: CHA : PIN1+ : SIGNAL PIN2+ : CHB OUTPUT MU12B INPUT Reference B: MU8 OUTPUT BRIDGE IN CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CHA OUTPUT INPUT MODE LF FILTER...
CONNECTION MU series professional loudspeaker system Speaker Wiring 1. Banana plugs to NL4 Connect to amplifier Connect to speaker 2. NL4 to NL4 Connect to amplifier Connect to speaker 3. Consumption curve of connection cable(Only for reference, the result is different if adopting the different cables) 8 Ohm 4 Ohm 2 Ohm...
INSTALLATION MU series professional loudspeaker system Installation Accessories Installation Reference Support flange and three special mounting points are very 1.Reference A convenient for the different applications. 1. Speaker stand 2.Reference B 3.Reference C Warning: Make sure the mounting accessories safety factor not less than 5:1 or meet the local standard during installation .
TECHNICAL SPECIFICATION MU series professional loudspeaker system Specification Speaker Testing Method System: Full range passive speaker 1. Frequency response 1X1.4" compression driver Tweeter: Use Pink noise to test the speaker in the anechoic room, adjust the level to make the speaker work at its rated impedance and the power Woofer: 1X8"...