Beta Three S1200Na User Manual page 16

Hide thumbs Also See for S1200Na:

S1200Na

SOFTWARE OPERATION INSTRUCTIONS

5.2.4> Dynamic range control

Press DRC button(or COMPRESSSION/LIMIT), the interface is as following:This compression just check the

HF signal, once the signal reach the limit, it will compress the HF and LF synchronously(synchronous action

is for the balance of HF and LF)

Five parameters in the dynamic range table is adjustable(the inner parameter is no name,

not adjustable)

Threshold:

Ratio:

RMS Estimator Time: The checking time of limit value of compression

Release time:

Attack time:

5.2.5> The delay setting of output channel

Mainly adjust the distance of sound center to make sure the sound center is same. Press DELAY with mouse,

the 5.2.4 interface will be showed, the right side is the delay adjust range from 0.0208ms to 21.2292ms.

Is the limit value of compression, adjustable from 0dB to -49.5dB

Compression ratio,adjustable from 1:1 to & :1

Release compression time after the checking that the signal level is

under the limit

Start up time after checking that the signal level is above the limit.