Second Processor Option - HP ProLiant ML350e Gen8 v2 Server User Manual

Install the access panel (on page 26).
7.
Return the server to an upright position.
8.
Lock the front bezel (on page 24).
9.
Connect each power cord to the server.
10.
Connect each power cord to the power source.
11.
Power up the server (on page 23).
12.

Second processor option

The server supports single-processor and dual-processor operation.
CAUTION:
should attempt to replace or install the processor in this server.
CAUTION:
configurations must contain processors with the same part number.
IMPORTANT:
installing the processor.
To install the component:
Power down the server (on page 23).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Unlock the front bezel (on page 24).
3.
Place the server on its side.
4.
Remove the access panel (on page 25).
5.
If installed, remove the PCI air baffle (on page 27).
6.
Remove the system air baffle (on page 28).
7.
To avoid damage to the processor and system board, only authorized personnel
To prevent possible server malfunction and damage to the equipment, multiprocessor
If installing a processor with a faster speed, update the system ROM before
Hardware options installation 39