Cancelling A Programme; Opening The Door - Zanussi ZWF 91283W User Manual

You can cancel or change the set of
the Finish In option before you touch
the button
button you can only cancel the
Finish In option.
To cancel the the Finish In option:
a. Touch the button
appliance to pause. The indicator of
button flashes.
b. Touch the button
above this button goes off.
Touch the button
programme immediately.
Interrupting a programme and changing
the options
You can change only some options before they
operate.
1. Touch .
The indicator of this button flashes.
2. Change the options. If you change any
option the Finish In option (if set) will be
disabled.
3. Touch again.
The programme continues.

Cancelling a programme

1. Press the button
cancel the programme and to deactivate the
appliance.
2. Press the same button again to activate the
appliance. Now, you can set a new washing
programme.
The appliance does not drain the
water. The water left in a drum can
be used for the next washing cycle.

Opening the door

While a programme (or the
appliance door is locked. The indicator
on.
CAUTION!
If the temperature and level of the
water in the drum are too high, you
cannot open the door.
12
. After touching the
to set the
until the indicator
again to start the
for some seconds to
) operates, the
To open the door during the first minutes
of the cycle (or when the
1. Touch the button
appliance.
2. Wait until the indicator
3. You can open the door.
4. Close the door and touch the button
again. The programme (or the
continues.
At the end of the programme
• The appliance stops automatically.
• The acoustic signal operates (if it is
activated).
• In the display
• The indicator of the button
• The door lock indicator
• You can open the door.
• Remove the laundry from the appliance.
Make sure that the drum is empty.
• Press the button
deactivate the appliance.
• Close the water tap.
• Keep the door and the detergent drawer
ajar, to prevent the mildew and odours.
The washing programme is completed,
but there is water in the drum:
• The drum turns regularly to prevent the
creases in the laundry.
• The indicator
drain the water.
• The door lock indicator
indicator of button
stays locked.
• You must drain the water to open the door.
Draining the water:
1. To drain the water.
• Touch the button
drains the water and spins with the
maximum spin speed for selected
is
washing programme.
• Alternatively, touch the button
change the spin speed and then touch
the button
operates) :
to pause the
goes off.
)
comes on.
goes off.
goes off.
for some seconds to
flashes to remind you to
is on. The
flashes. The door
. The appliance
. The appliance drains the
www.zanussi.com
to