Table of Contents
Advertisement
Cancelling the delay start after the
countdown has started
To cancel the delay start:
1. Touch the Inicio/Pausa
appliance. The related indicator flashes.
2. Touch the Inicio Diferido button repeatedly until
the display shows .
3. Touch the Inicio/Pausa
start the programme immediately.
Changing the delay start after the countdown
has started
To change the delay start:
1. Touch the Inicio/Pausa
appliance. The related indicator flashes.
2. Touch the Inicio Diferido button repeatedly until
the display shows the desired delay time.
3. Touch the Inicio/Pausa
start the new countdown.
THE AUTOAJUST SYSTEM LOAD DETECTION
After touching the Inicio/Pausa
1. The AutoAjust System starts estimating the
weight of the load to calculate the real
programme duration. During this phase the two
dots separating hours from minutes are
blinking.
2. After about 15-20 minutes new cycle duration
is displayed.
The appliance automatically adjusts the
programme duration to the load to achieve
perfect washing results in the minimum
possible time.
The AutoAjust System is not available
with all programmes such as : Lana
\Lãs and programmes with short
cycles.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
When the programme is running, you can change
only some options:
1. Touch the Inicio/Pausa
The related indicator flashes.
2. Change the options. The given information in
the display changes accordingly.
3. Touch the button Inicio/Pausa
The washing programme continues.
26
button to pause the
button again to
button to pause the
button again to
button:
button.
again.
CANCELLING A RUNNING PROGRAMME
1. Press the button On/Off to cancel the
programme and to deactivate the appliance.
2. Press the button On/Off again to activate the
appliance.
If the AutoAjust System has completed
and the water filling has already
started, the new programme starts
without repeating the AutoAjust
System. The water and the detergent
are not drained out in order to avoid
waste. The display shows the
maximum duration of the programme,
updating it about 20 minutes after the
starting of the new programme.
There is also an alternative way of cancelling:
1. Rotate the selector knob to the "Reset" position
.
2. Wait for 1 second. The display shows
Now, you can set a new washing programme.
OPENING THE DOOR - ADDING GARMENTS
If the temperature and level of the
water in the drum are too high and/or
the drum is still rotating you should not
open the door.
While a programme or the delay start operates, the
appliance door is locked. The display shows the
indicator
.
1. Touch the Inicio/Pausa
In the display the related door lock indicator goes
off.
2. Open the appliance door. If necessary, add or
remove the items. Close the door and touch
the Inicio/Pausa
The programme or the delay start continues.
END OF THE PROGRAMME
When the programme has finished, the appliance
stops automatically. The acoustic signals operate (if
they are active). The display shows
The indicator of the Inicio/Pausa
off.
The door unlocks and the indicator
1. Press button On/Off to deactivate the
appliance.
After five minutes from the end of the programme,
the energy saving function automatically
deactivates the appliance.
.
button.
button.
button goes
goes off.
Advertisement
Table of Contents
