Signal Quality; Power On The Monitor - Marine PC MPC-AWMVRL User Manual

Signal Quality

• The strength of the video signal provided to the MPC-AWMVRX Monitor has a direct
bearing on the quality of the images displayed
• The cable supplied with the unit shall provide the optimum image if proper
wiring practices are followed
• Install the cable properly and keep it away from sources of EMI such as
electric motors, or unshielded RF sources such as radar and microwaves
• Splitting the video signal also splits the strength of the signal
• If your installation requires more than one Monitor to be driven from a single
video source, it is highly recommended that a video signal booster (line
driver) be used in the circuit, and
• Some splitters are available with an integral line driver. Whether or not a line
driver is used, single cable lengths in excess of our standard cable length
should be of high quality shielded VGA cable.

Power on the Monitor

• The Windows Operating System should automatically apply the best generic driver
for this connection, and
• Follow the instructions under section Computer Display Properties for optimum
display quality.
MPC-AWMVRL-UM(B) 1/2011
17