Initially Setting Up The Vidyoportal - Vidyo VidyoRoom HD-220 User Manual

Before you can start configuring and using the VidyoRoom, you must initially set up the VidyoPortal. Note
that this guide describes the features available with VidyoPortal version 2.2.
To begin, simply power on your VidyoRoom system.
The Account screen will display the default IP address of your VidyoPortal as well as the default user name
and the password that came with your VidyoRoom. You must change these as described below.
To enter VidyoPortal IP address, user name, and password:
1. Enter your VidyoPortal IP address or URL. (You don't have to type the usual "http://".)
2. Enter the user name and password for your VidyoPortal.
3. Use the arrow buttons on the remote control to navigate to the Save button and then press the
button on the remote control.
If you receive any errors, double check your user name, password, server address settings, and
network configuration. For more information about how to change the network settings as well as
the other settings for the VidyoRoom, see the "Changing the VidyoRoom Settings" chapter that
begins on page

3. Initially Setting Up the VidyoPortal

45.
11