Specifications - Roland DU2-64 User Manual

3-3 Specifications

Dryer unit
Power requirements
Power consumption
Weight
Environment
Included items
*1

Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment.

Depending on the ambient temperature and media width, the preset temperature may fail to be reached.
*2

Be sure to connect the machine to an unshared electrical circuit.

Be sure to verify the amperage of the circuit breaker or fuse used.
*3

Operating environment
*4
When this unit is used with a printer equipped with a cutting feature, no assurance is made with respect to the following points. Refer also to the
user's manual included with the printer.

Distance accuracy (when cutting)

Repetition accuracy (when cutting)

Repetition between printing and cutting

Alignment accuracy for printing and cutting when reloading media
32
Chapter 3 Appendix
Heating type (with blower fan), setting range for the preset temperature: 30 to
55°C (86 to 130°F)
AC 100 to 120V ±10%, 5.5 A, 50/60 Hz or AC 220 to 240 V ±10%, 3 A, 50/60 Hz
(*2)
Approx. 750 W
26 kg (57 lb.)
Power on Temperature: 15 to 32˚C (59 to 90˚F)––(20˚C (68˚F) or more recommended), humid-
(*3)
ity: 35 to 80% (no condensation)
Power off
Temperature: 5 to 40˚C (41 to 104˚F), humidity: 20 to 80% (no condensation)
Power cord, arms, bushing, cable clamps, stays, hexagonal wrench, bolts, washers,
User's Manual
Use in an operating environ-
ment within this range.
DU2-64
(*1)