Line Seizure; Trunk Keys - Octopus F100 Operating Instructions Manual

Making calls in the team/executive/secretary configuration
Step by Step
92

Line seizure

Line seizure must be configured (consult your service personnel). If
automatic line seizure is configured, a trunk is automatically as-
signed when you lift the handset or press the trunk key.

Trunk keys

The programmable keys on multi-line phones function as line keys.
Every sensor key programmed as a "Trunk key" (key label: Transfer
Trk) corresponds to a trunk with the result that you can configure up
to 8 trunks in Octophon F630 TDM .
As a team member, you can independently program the following
functions on keys page 61:
• Direct station select
• Join/leave group
(not available on executive phone in an executive/secretary
team)
• Ring Transfer: On/Off
(only in an executive/secretary team)
You can also program a sensor key with the function "Forward Line"
(call forwarding) for each line.
LED displays on trunk keys
LED Explanation
S
Off – The line is in idle mode.
– Incoming call on the line.
T
[1]
Flashing – Hold reminder is activated.
– The line is on "Hold".
R
On – The line is busy.
[1] In this manual, flashing keys are identified by this icon, regardless
of the flashing interval. The flashing interval represents different
statuses, which are described in detail in the corresponding sec-
tions of the manual.