Electromagnetic Compatibility Statement - Bematech LR2000 User Manual

The thermal head is a hot surface. Do not touch.
When the following occurs:
Liquid gets inside the POS printer;

Accidental physical damage;

The power cord or plug is damaged;

POS printer produces a burning smell;

Immediately disconnect the power supply, unplug the power cord, and contact a
qualified service technician.

1.2 Electromagnetic compatibility statement

FCC NOTICE
This device complies with Part 15 of FCC Rules. Operations are subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
EUROPEAN COMMUNITY (CE) MARK OF CONFORMITY
This product is in conformity with the protection requirements of EU Council
Directive 89/336/EEC on the approximation of the laws of the Member States
relating to electromagnetic compatibility.
responsibility for any failure to satisfy the protection requirements resulting
from a non-recommended modification of the product. This product has been
tested and found to comply with the limits for Class A Information Technology
Equipment according to CISPR 22 / European Standard EN 55022. The limits for
Class A equipment were derived for commercial and industrial environments to
provide reasonable
communication equipment.
protection against
3
Logic Controls cannot accept
interference with licensed