Gold's Gym Platinum GGBE6958.0 User Manual page 23

49. Route the Long Cable (54) over a 90mm Pulley
(58). Attach the 90mm Pulley and a Small Cable
Trap (63) to the right Side Top Frame (13) with an
M10 x 49mm Button Bolt (104) and an M10
Locknut (79). Make sure that the Small Cable
Trap is oriented to hold the Cable in the
groove of the 90mm Pulley.
50. Route the Long Cable (54) through the Right
Upright (4) and a Swivel Arm (32). Then, route
the Long Cable over a 90mm Pulley (58). Attach
the 90mm Pulley inside the Swivel Arm with an
M10 x 53mm Button Bolt (147), two M10
Washers (84), two 6mm Spacers (75), and an
M10 Locknut (79).
51. Slide a Cable Stop (52) onto the Long Cable (54).
Hold an M6 Locknut (80) inside of a Clip (53),
and insert the Long Cable (54) into the Clip and
the Locknut. Hold the crimp on the Cable with a
pair of pliers. Insert a screwdriver between the
Locknut and the Clip. Rotate the screwdriver, the
Clip, and the Locknut together until two threads of
the Cable show past the Locknut.
Slide the Cable Stop (52) over the Clip (53).
52. Attach the Upright Backrest (29) to the Backrest
Upright (8) with two M6 x 67mm Screws (89) and
two M6 Washers (86).
49
13
104
50
54
58
147
84
51
52
29
23
54
63
79
58
84
32
75
79
4
75
54
52
80
53
8
89
86