Table of Contents
Advertisement
TECHNICAL SERVICE MANUAL
Secondary Master
The Secondary Master sub-menu contains parameters related to the Media bay drive.
CAUTION: The parameters in this screen are for the advanced users only. Typically, you do not need to
change the values in this screen. The default setting of Auto optimizes all the settings for your Media
bay drive.
IDE Secondary Master
Type:
Multi-Sector Transfers:
LBA Mode Control:
32 Bit I/O:
Transfer Mode:
Ultra DMA Mode:
F1
Help
Esc Exit
Parameter
Type
Multi-Sector Transfers
LBA Mode Control
32 Bit I/O
Transfer Mode
Ultra DMA Mode
PhoenixBIOS Setup Utility
[DVD/CDRW ]
[Auto]
[Disabled]
[Disabled]
[Disabled]
[Standard]
[Disabled]
Select Item
Select Menu
The setting of detail functions stands on type
Help: Auto = Autotype Hard-Disk drive installed
here.
Specify the number of sectors per block for multiple
sector transfers.
Enabling LBA causes Logical Block Adddressing to
be used in place of Cylinders, Heads and Sectors.
The setting of 32 bit IDE data transfers .
Select the method for moving data to/from the drive.
Autotype the drive to select the optimum transfer
mode.
Selects the Ultra DMA mode used for moving
data to/from the drive. Autotype the drive to
select the optimum transfer mode.
Advanced
F5/F6 Change Values
Enter Select
Sub-Menu
Description
38
Prestigio Nobile 1560
Item Specific Help
Auto = Autotype Hard-Disk
drive installed here.
F9
Setup Defaults
F10 Save and Exit
Options
Auto
Disabled
Disabled
Disabled or Enabled
Standard
Disabled
Advertisement
Table of Contents
