Default Input Signal Sources Selection; Default Recording Quality Selection - SONIQ DVR150 Operation Manual

MENU INDEX FOR INITIAL SETUP

Default Input Signal Sources Selection

1 In the record setup menu, select "Default source" by [ ], [ ] buttons and press [ENTER] button,
then a pop-up menu will appear.
2
Select the desired value by [ ], [ ] buttons and then press [ENTER] button.
There are several groups of input source ports. Please refer to the "Basic Information-
Illustration of the Front/Rear Panel" for their position on the unit.
*
Rear CVBS: Rear panel composite video and audio inputs.
Rear S-VIDEO: Rear panel S-video and audio inputs.
TUNER: Rear panel TV tuner input.
Front CVBS: Front panel composite video and audio inputs.
Front S-VIDEO: Front panel S-video and audio inputs.
DV: Front panel DV input.
SCART: Rear panel Scart input.

Default Recording Quality Selection

1
In the record setup menu, select
item "Default quality" by [
b u t t o n s , p r e s s
button,then a list menu will appear.
2
Select the desired value by [ ], [ ] buttons, and then press [ENTER] button.
Please refer to the "TERMS" for the four recording qualities: HQ, SP, EP, SLP.
], [ ]
[ E N T E R ]
40
SYSTEM SETUP - GENERAL
Auto chapter marker
Default source
Default quality
SYSTEM SETUP - GENERAL
Auto chapter marker
Default source
Default quality
OFF
Tuner
DV
SCART
Tuner
OFF
Tuner
SP
HQ
SP
EP
SLP