Speaker Setting; Rating Level Setup - SONIQ DVR150 Operation Manual

MENU INDEX FOR INITIAL SETUP

Speaker setting

1
In the playback setup menu, select " Speaker setting" by [ ], [ ] buttons, and press [ENTER] button,
then the following screen will appear.
2
Select "Ok"by [ ], [ ] buttons and press [ENTER] button to confirm.

Rating Level Setup

By setting this unit's authorization rating and password, certain discs with control grade cannot be
played without inputting the password.
1
In the playback setup menu, move the cursor up
and down by pressing the [ ], [ ] buttons to
select the item "Rating level", and then press
[ENTER] button. The TV screen displays:
2
Input the password and press [ENTER] button.
If the password is right, the TV screen displays the
window shown as the right figure.
The overiding password is 3308.
3
Select "Set rating level", and press
[ENTER] button to display the pop-up list
which is shown as the right figure:
4
Select the rating level by [ ], [ ] buttons and press [ENTER] button to confirm.
5
If you do not want to change the original password, highlight the "OK" in the menu through
cursor buttons and then press [ENTER] button.
Speaker Setting
Front speaker
Small
Center speaker
Small
Small
Surround speaker
Subwoofer
Dynamic range compressive
TEST
37
Distance 4.5 M
Distance 4.5 M
Distance 4.5 M
Yes
Off
OK
Enter Password
OK
Cancel
Enter Password
OFF
New password
Enter Password
OFF
OFF
8: Adult
OK
NEW
OK
NEW