Basic Operations - SONIQ DVR150 Operation Manual

Basic operations

Mainly use the remote control to operate this unit. The function buttons on the front panel may also
fulfill part of the operations. The feedback information of the system is mainly displayed on the TV
screen, and part of the information is displayed on the VFD on the front panel.
The operating functions for this unit are classified into six modes:
PLAYBACK MODE, RECORDING MODE, EDITING MODE, DISC OPERATION MODE, SETUP MODE
and TIMER TASK SETTING MODE.
To switch mode , press: [PLAY] button, [SOURCE] button,[EDIT] button, [DISC OP] button,
[SETUP] button.
In playback, recording, editing and disc operation modes, system can be controlled by "control menu".
In playback/recording mode, the menu can be displayed by [DISPLAY] button. First pressing the
[DISPLAY] button, a text information bar showing the current working information will appear, and
secondly pressing the button will display the control menu. The control menu will appear
automatically when you enter editing mode/disc operation mode. In the control menu, you can move
focus by cursor buttons to select a sub item to perform a corresponding function.
This area shows current working mode
This area shows corresponding working information
Monitor Front S-VIDEO(No signal) SP
The text information bar when system is in recording mode
You can configure the system in setup mode. Pressing [SETUP] button can enter this mode, In setup
mode, the control menu is always shown. Pressing [SETUP] button again to exit.
Make a timer record task in timer task setting mode. Pressing [TIMER] button can enter this mode.
Pressing [TIMER] button in this mode can exit.
BASIC INFORMATION
RECORD (DVD+RW)
MODE
SOURCE
QUALITY
REC TO
TRICK
TITLE
CHAPTER
TIME
The control menu when system is in recording mode
8
New Title
Front S-VIDEO
SP
DVD-VIDEO
Stop
01/01
01
0:02:45/2:07:09