Restore Factory Settings; Playback Settings; Tv Aspect Ratio - SONIQ DVR150 Operation Manual

Hide thumbs

Table Of Contents

Table of Contents

MENU INDEX FOR INITIAL SETUP

Restore Factory Setting

Select "Restore factory settings" by [

buttons in the general setup menu, then press

[ENTER] button, and the TV screen displays:

Highlight "OK" in the menu by [ ],[ ] buttons.

Press [ENTER] button to make all setup items restore the factory settings.

When your unit is in abnormal working mode, it is probably due to wrong set up. Please

try the "Restore Factory Settings" operation to resume normal functioning.

Playback Settings

Display the system setup control menu.

Move the cursor up and down by[ ], [ ]

buttons to select "

Press [ENTER] button to enter the

playback setup mode. The right figure

is the main menu of playback setup.

Note

This setup must be proceeded in No Disc or Tray Out status.

TV Aspect Ratio

In the playback setup menu, select item

"TV aspect ratio" by [

press [ENTER] button and then the

value list will appear, which is shown

as the right figure.

Select the suitable value by [ ], [ ] buttons, and then press the [ENTER] button.

Definitions of each item are shown as follows:

* 16:9: Applicable to wide screen TV set.

* Pan Scan: Suitable for the common size TV set. When playing wide screen pictures, left and

right edges of the original pictures are cut off. The picture will be displayed to full screen.

* Letter Box: Suitable for the common size TV set. When playing wide screen pictures, black

banners will appear on the top and bottom of the TV set.

Press [RETURN] button to return to the previous menu and proceed other settings.

Note

If a disc is recorded in the aspect ratio of 4:3,

the ratio can only be 4:3, no matter which screen setting you select.

This setting should conform to the aspect ratio of the TV set.

], [

]

" item.

], [

] buttons,