Maintenance - Kodak i600 Series User Manual

5 Maintenance

A-61500 April 2007
This chapter provides:
• a cleaning frequency chart
• a list of cleaning tools and materials
• a list of supplies and accessories
• cleaning procedures for the scanner
• replacement procedures for parts that are customer-replaceable
IMPORTANT: Scanner components marked with a green tab indicate
operator-accessible parts.
Cleaning your scanner and preventative maintenance on a regular
basis is required to ensure the best possible image quality. The
following is a preventative maintenance procedure that is
recommended to prevent costly interruptions during production
scanning. Following this procedure as recommended should take
approximately 5 to 10 minutes.
Some document types generate more paper dust and debris and may
require more frequent cleaning than recommended.
NOTES:
• Some debris from the rubber tires on the feed module and separation
roller is normal. Tire debris does not always mean that the tires are
worn or damaged. After cleaning, inspect the tires for wear and
replace the separation roller or feed module if necessary.
• When cleaning rollers/tires, allow the rollers/tires to dry completely
before scanning.
• Using unapproved cleaning fluids or solvents may damage the rubber
tires.
5-1