Dimensions; Bolt Torque Requirements; Assembly Instructions; To 3.12 Assembly - Exmark METRO Operator's Manual

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983
2.9.6

2.10 DIMENSIONS

2.10.1 Overall Width:
Discharge chute
down
Up
(transport only)
Overall Length
Overall Height
Tread Width∗ ∗ ∗ ∗
Curb Weight∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗
To outside of tires.
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
Weights will vary slightly depending on engine option.
♦ ♦ ♦ ♦ For Serial No.s 150,000 through 159,999.
◊ ◊ ◊ ◊ For Serial No.s 160,000 and higher.
2.11 TORQUE REQUIREMENTS
BOLT LOCATION
Blade/Cutter Housing Spindle Bolt ........ 75-80 ft-lbs.
Caster Bracket Mounts .................... 30-35 ft-lbs.
Cutter Deck/Engine Deck Mount ............ 30-35 ft-lbs.
Engine Mounting Bolts
Transmission Shifter Lever ............... 30-35 ft-lbs.

3. ASSEMBLY INSTRUCTIONS

3.1
3.2
3.3
3.4
Cutting Height: Adjusts in 1/4" (.63 cm) or smaller
increments by various adjustments of caster spacers,
blade spacers and axle height, from 1" to 4 1/4"
(2.5 cm - 10.8 cm).
32"
42.45 in.
107.8 cm
32.75 in.
83.2 cm
32"
78 in.
198.1 cm
40.0 in.
101.6 cm
32.05 in.
81.4 cm
374 lbs
170 kg
Briggs & Stratton ................. 15-20 ft-lbs.
Kohler & Kawasaki ................. 25-30 ft-lbs.
Uncrate unit, leaving it on the pallet, place upper handle
assembly, fuel tank, and shifter lever at the rear of the
machine. Place casters at the front of the unit.
Place a length of 4" x 4" block between the front of the
cutter deck and the pallet.
Remove the bolt bag from the top of the fuel tank support.
Refer to Parts Manual to help you identify and locate parts
and their proper position.
www.mymowerparts.com
48" ♦ ♦ ♦ ♦
36"
46.1 in. 58.1 in.
117.1 cm 147.6 cm
36.4 in. 48.4 in.
92.5 cm. 122.9 cm
48" ♦ ♦ ♦ ♦
36"
78 in. 74.7 in.
198.1 cm 189.7 cm
40.0 in. 40.0 in.
101.6 cm. 101.6 cm
35.6 in. 35.6 in.
90.4 cm 90.4 cm
391 lbs 431 lbs
177 kg 196 kg
- 8 -
48" ◊ ◊ ◊ ◊
58.2 in.
148.0 cm
48.1 in.
122.2 cm
48" ◊ ◊ ◊ ◊
73.0 in.
185.4 cm
40.0 in.
101.6 cm
35.6 in.
90.4 cm
439 lbs
199 kg
TORQUE