Exmark METRO Operator's Manual page 18

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983
SHIFTER LEVER
TO TRANSMISSION
3.8.5
FIG. 6
Install and adjust wheel drive linkages.
a) Screw threaded end of drive linkages into swivels
in wheel drive idler arms.
b) Insert clevis pin from bolt bag through drive linkage,
lever and slot in the neutral lock/park brake latches (See
Figure 9). Make proper adjustments before adding hairpins.
Clevis Pin
Drive Linkage
c) Adjust drive linkage length by threading into or
out of the swivel until there is a 3/16" to 1/4"
clearance between the linkage assembly and the
bottom of the slot in the neutral lock/park brake
latch (See Figure 10).
www.mymowerparts.com
THIS CLEARANCE SHOULD BE EQUAL
THIS CLEARANCE SHOULD BE EQUAL
Neutral Lock/Park Brake Latch
FIG. 9
LEVER AND ROD
ADJUSTMENT
- 13 -
FIG. 7
FIG. 8
Drive Lever