The ATA 66 Driver installation
13. Click on the "Finish" button.
14. Then the system will ask you to restart the system. If the settings
reported in step 12 are not what set on the host adapter, you must
adjust the settings by using the device manager in the System control
panel before restarting your computer.
15. The driver for ACPI function is useful only if hardware supports
ACPI function.
Uninstalling the Driver
You can use the device manager in the System control panel to remove the
driver.
Installing the Windows 2000 Drivers
Usually, when you boot up the Windows 2000 system for the first time, the
system will be able to detect the HPT370 Ultra DMA host Adapter
automatically and ask you to install the driver for HPT370. You can just
follow the instructions promted by the system to install the driver. The
driver is located in the following directory:
D:\drivers\HPT370\Win2k
Otherwise, you can install the driver by the following steps:
1.
Windows 2000 must be installed on the system prior to installing the
driver.
2.
Close any running applications.
3.
Open "My Computer".
4.
Double click on the "Control Panel" icon.
5.
Double click on the "System" applet.
6.
Select Hardware function
7.
Click on "Device Manager"
8.
Double click "! Mass storage controller"
9.
Click on "Reinstall Driver"
10. Click on "Next" button
11. Click on "Next" button
12. Select "Specify a location" and click on "Next" button
(Where D is your CD-ROM driver letter)
96
SY-6BA+100