Table of Contents
Advertisement
The ATA 66 Driver installation
13. You can key-in path from SOYO-CD or use "browse ... " to direct to
correct path
14. Click on "OK" button
15. Click on "Next" button
16. Click on" Yes" button
17. Completing the Upgrade device driver wizard
18. Click on the "Finish" button
19. Then the system will ask you to restart the system.
Uninstalling the Driver
You can use the device manager in the System control panel to remove the
driver.
Installing the Windows NT 4.0 Drivers
When Windows NT is up, install the HPT370 device driver as follows:
1. Installing Device Driver
(1.) Open My Computer
(2.) Open Control Panel
(3.) Double click icon SCSI Adapters
(4.) Click Drivers
(5.) Click Add...
(6.) Click Have Disk...
(7.) Insert the SOYO-CD with the HPT370 Windows NT 4.0 device
driver into your CD-ROM drive, and type
"D:\drivers\HPT370\WinNT [Enter]", then click OK. (for D type
your CD-ROM driver letter)
(8.) Select HPT370 Ultra DMA Controller, you will be asked to enter
the full path to the HPT370 Ultra DMA Controller files, type in
D:\drivers\HPT370\WinNT and then click Continue
(9.) When asked to restart your computer, click Yes
Your hard disk drive attached to the HPT370 host adapter must be
partitioned and formatted before you can access it. Please see Partitioning
Your Hard Disk to know how to partition and format a hard disk drive.
97
SY-6BA+100
Advertisement
Table of Contents
