Using The Menu System; To Enter The Menu System - PROCEED Audio Video Preamplifier Manual

to enter the menu system

Using The Menu System

The AVP uses a dynamically-updated menu system that operates more intelli-
gently than most such systems. For example, when configuring inputs, the menu
options change according to the selections you have made. In effect, the AVP only
asks you for relevant information, thereby minimizing possible confusion.
Four buttons on the remote control are used to navigate through its extensive on
screen menu system:
menu
Y ou may also navigate the menus from the front panel. The
may be used interchangeably with the
are more comfortable navigating the menu from the front panel, pressing and
holding will get you into the menu system (much as pressing
recall
from the remote); once in the menu system,
would (though you no longer have to press and hold it). Finally , while in the
menu system, pressing
mute
on the remote. Thus:
enter
• volume ± =
volume knob
• menu = recall
• enter = mute
For clarity's sake, in most of the rest of the manual will refer to the labelled re-
mote control commands only , rather than always making awkward references to
( ) or similar constructions. Just remember that you can use the
menu recall
menus just as easily from the front panel as from the remote control.
Pressing once will display the
menu
tem. Note that the front panel display of the AVP shows
enter the on screen menu system (to encourage you to look on screen, where
the important information is). The main menu provides access to the three major
function areas of the menu system:
• The Operate Menu
tailor the way the system interacts with you to suit your personal
preferences, but do not effect the performance of the system in
any substantive way .
• The Setup Menu is normally used only by the installer at the time
of the initial system setup. Many of the items in this menu have
significant impact on the actual performance and functionality of
the system, and should be changed only by those who have taken
the time to learn the way the system works.
• The is also used by your installer to customize your
Custom Menu
system even further. Whereas every system must be properly setup
using the
Setup Menu
rarely needed—primarily in systems that employ home automation.
Once again, the items contained within this menu should be used
and/or changed only by those who have taken the time to learn
the way the system works (which you can do by reading this
manual thoroughly , if you wish).
• The menu describes the various parts of the operating
About...
software being used by the AVP , and is used only as a reference
, , ,
enter volume + volume –
volume ±
buttons on the remote. If you
continues to serve as
recall
on the front panel has the same effect as pressing
(must press and hold to enter menu system)
AVP Main Menu
is where user preferences are set. These items
, the items in the
Custom Menu
.
on the
volume knob
would
menu
menu
of the on screen menu sys-
when you
OSD ACTIVE
are more
35