Kodak i800 Series Installing And Using page 2

7. When the side guides are adjusted, tighten the
screw.
8. Select the Diagnostics Settings menu
9. Use the right or left arrow to navigate to the Setting
function.
10. Press the down arrow until Set elevator position is
displayed on the Operator Control Panel.
11. The setting of 25 should be used for manual or
continuous feed operation.
12. Scan the document(s) in single-sheet or hand-held
position.
A-61530 _EN 1/2006
Part No. 8CK187
Removing the manual feeder
1. Select this icon
lowest position.
2. Remove the manual feeder.
icon.
to lower the elevator tray to its
EASTMAN KODAK COMPANY
Document Imaging
Rochester, New York 14650
Kodak is a trademark of Eastman Kodak Company.
© Eastman Kodak Company, 2006
www.kodak.com/go/docimaging