Advertisement
6
3. Guarantee
For guarantees please refer to the respective
terms and conditions of supply for your
country.
4. Fault elimination for the user
Fault
No hot water despite fl ow volume
setting at
right-hand stop.
"Trip" - light on
The unit is not being switched on.
Electricity
supply and fl ow available.
The installation, electrical
connection and fi rst operation
of this appliance should be carried out by a
qualifi ed installer.
Cause
The water fl ow volume required for the
unit to turn on has not been reached.
- The shower head is blocked with dirt or
limescale.
- Flow volume too low.
- ELSD activated
The water fl ow volume required for the
unit
to turn on has not been reached.
- Filter in the cold water connection pipe
blocked with dirt.
- Water pressure not enough
The company does not accept liability
for failure of any good supplied which have
not been installed and operated in
accordance with the manufacturer's
instructions.
Rectifi cation
- Clean shower head or remove limescale.
- Increase fl ow volume.
- Press "Reset" - button.
- Clean the fi lter after shutting off the cold
water intake.
- Increase mains pressure
Advertisement
