Turning The Espresso Machine On - La Marzocco GB/5 Software Programming Manual

GB/5 - FB/80
e -
Description
• The following is the procedure for turning on the
power to the espresso machine.
• Please follow the procedures carefully to avoid any
damage to the espresso machine.
Display
1
LaMarzocco 09:30
2
LaMarzocco
Rev.1.09
3
OFF 09:30
4
LaMarzocco 09:30
5
Boiler: 09:30
HAZARDOUS VOLTAGE DISCONNECT FROM POWER SUPPLY
www.lamarzocco.com

Turning the Espresso Machine On

Turn the Main Switch to the On position.
0
1
The message at left will be displayed briefly. This message indicates the revision level of the
software installed in this espresso machine.
To complete the turn on process, press the
machine begins to automatically fill the steam boiler until full. The display is asking if you have
completed the coffee boiler air bleeding process of the coffee boiler. When this process is
complete, press the enter button. If the screen does not change, wait until the steam boiler is
completely full and try again.
The espresso machine is now ON and you should see one of the two following displays.
When the espresso machine reaches operating temperature the lights on all keypads will light
indicating that the espresso machine is ready to use.
BEFORE SERVICING
NOTE: If the message "First Installat. Enter to confirm"
appears in the display, please see the preceding page
entitled "Initial installation
Operating Procedure
0 OFF
1
ON
OFF
button and the display at left is shown. The
Version 1.3
Start Up Procedures
OFF
ON ON
5