Av Programming Introduction - La Marzocco GB/5 Software Programming Manual

AV Programming Introduction

Description
• This espresso machine has a very powerful CPU and
many configurable settings.
• Additionally, there are many feedback controls
employed in this espresso machine to troubleshoot
problems should they occur.
• The following is a brief introduction to the controls
and display and how they interact with the operator.
The digital display (display) is a backlit display capable of displaying 2 lines of 16 characters. The display
enables the operator to interact with the espresso machine to visibly change parameter values. The display
also provides valuable information to the operator. There are several warnings that the can be displayed to
alert the operator of an unusual condition or a fault. Additionally, simple messages are displayed alerting the
operator that an action has been started or that a process needs to begin.
The programming keypad is always located as the group 1 controls (left most keypad). These are the
buttons used to change values within the configurable parameters.
The and the
MODE
The button is used to scroll through the parameters. Additionally, this button also confirms some
values within the parameters.
ENTER
The button confirms the values within the parameters.Additionally it is also used to scroll through the
values within the parameters.
The button is used to access the programming mode.
ON
OFF
The button is used to turn on and turn off the espresso machine. This button can also be used to exit
the programming mode.
2
Digital Display
LaMarzocco
Firenze Italia
Programming Keypad
_
+
MODE
+
buttons are used to change the values of the individual parameters.
09:30
e -
ENTER
ON
OFF
La Marzocco, S.r.l.
Version 1.3
Firenze, Italia