Wlan Module - HP Chromebook 11-2100 Maintenance And Service Manual

3. Remove the connector board (3).
Reverse this procedure to install the connector board.

WLAN module

Description
Intel Dual Band Wireless-AC 7260 802.11 ac 2×2 WiFi + Bluetooth 4.0 Combo Adapter
Intel Dual Band Wireless-N 7260AN 802.11 a/b/g/n 2×2 WiFi + Bluetooth 4.0 Combo Adapter
CAUTION:
authorized for use in the computer by the governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a warning message, remove the module to
restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
Remove the WLAN module:
36 Chapter 5 Removal and replacement procedures
To prevent an unresponsive system, replace the wireless module only with a wireless module
Keyboard/top cover on page
Spare part number
784645-005
784647-005
25).