Cisco 7925G Administration Manual page 9

Cisco Unified Wireless IP Phone
LED
Power/Bluetooth
Status
Battery
The spare battery charges only when the Cisco Unified Wireless IP Phone 7925G Desktop Charger is plugged
into line power.
The Cisco Unified Wireless IP Phone 7925G Desktop Charger supports Bluetooth Version 2.1 + Extended
Data Rate (EDR) using Hands-free Version 1.5.
The following figure shows the location of the Control button. The Control button is used when pairing the
charger with the phone.
Color Flash rate
Unlit Solid
Green Solid
Blue Flashing slowly
Solid
Unlit Solid
Red Solid
Green Solid
Amber-yellow Solid
Flashing
Flashing and
dimming slowly
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
Cisco Unified Wireless IP Phone 7925G Desktop Charger Overview
Meaning
The charger is not plugged into line power.
The charger is plugged into line power.
Bluetooth is connecting or disconnecting from the
charger.
The charger is connected to the phone using
Bluetooth.
No spare battery is installed.
The spare battery is charging.
The spare battery is fully charged.
The station is powered by the spare battery with
adequate charge.
The station is powered by the spare battery, but the
battery is low.
The station is powered by the spare battery, but the
battery is rapidly depleting.
9