Installation - Home Decorators 238-15-48MC Use And Care Manual

Installation

1
Attaching the connectors
□ Lay the right upper side panel (L) and the left upper side panel
(K) on a clean, flat surface, flat side down. Attach four short
connectors (BB) to each panel with bolts (AA) as shown. Lay
one inner panel (H) and one lower side panel (J) on a clean,
flat surface with the predrilled holes facing up. Attach two
long connectors (CC) to each end of the lower side panel (J)
using bolts (AA) as shown. Attach four long connectors (CC)
to each end of the inner panel (H) using bolts (AA) as shown.
Repeat using the second inner panel (H) and lower side panel (J).
AA
BB
2
Attaching the panels to the base
□ Lay the base (B) on a flat surface. Insert eight dowels
(DD) into the predrilled holes in the base (B). Slip one
inner panel (H) and one lower side panel (J) over the
dowels (DD) on the left end of the base (B) and secure
using bolts (AA) as shown. Repeat using the second
inner panel (H) and lower side panel (J).
J
AA
AA
CC
H x2
J x2
K
L
H
J
B
DD
3
Attaching the media shelf
□ Insert eight dowels (DD) into the predrilled holes in the
top edges of the assembly. Place the media shelf (C) on
top of the assembly, ensuring the pre-drilled holes in the
media shelf (C) fit on top of the dowels (DD). Secure the
media shelf (C) to the assembly by inserting bolts (AA)
underneath the media shelf (C) as shown.
DD
4
Attaching the upper side panels
□ Insert four dowels (DD) into the predrilled holes on each
end of the assembly. Attach the left upper side panel (K)
and the right upper side panel (L) using bolts (AA).
K
AA
6
C
AA
L
DD