Selecting Image Settings - Kodak I1400 Image Processing Manual

Selecting Image
settings
A-61623 July 2008
The procedures that follow describe how to configure a customized
Setting Shortcut. Complete descriptions of the features and options on
the Kodak Scanner window and tabs are found in the section entitled,
"The main Kodak Scanner window".
NOTE: Setting Shortcuts can sometimes be overridden by your
scanning application. If this happens, the shortcut you call will
appear in the main Kodak Scanner window in italics with the
word <Changed> next to it. This is normal behavior for an
application that does not use Setting Shortcuts and downloads
its preferred individual settings to the scanner first and then
provides access to the TWAIN datasource.
When you click OK to begin scanning, you will be asked if you
want to save the changed settings. When using an application
that does not use Setting Shortcuts, select No to this prompt
and continue scanning.
From the main Kodak Scanner window:
1. Select a predefined Setting Shortcut from the Setting Shortcuts list.
Choose a Setting Shortcut that describes as closely as possible the
image output you desire.
2. Determine if you want to capture an electronic image of the front of
your document, back of your document or both sides of your
document and make the selection from the Input document is drop-
down list. Options are:
• Two Sided — captures both sides of the document
• One Sided-Front — captures the front side only
• One Sided-Back — captures the back side only
5