Kodak I1400 Image Processing Manual page 87

84
Counter — if you want to add a Counter to the print string, you can
enter one of the following options:
• Initial Value: this value is used to assign the document count for the
next document entering the transport and is incremented sequentially
by the scanner unless another document count is received from the
host. This value is returned in the image header.
• Field Width: used to control the width of the document counter.
Values range from 1 to 9.
• Format — allows you to configure the format of the counter when the
width of the value is less than the field width (the examples indicate a
field width of 3 and the counter at 4). Options are:
- Display Leading Zeros (default): "004"
- Suppress Leading Zeros: "4"
- Compress Leading Zeros: " 4"
Top Margin — allows you to define the distance from the lead edge
before the print string begins. Enter the desired amount in the text box.
NOTE: Printing automatically stops 6.3 mm (1/4-inch) from the trailing
edge of the document even if the information has not been
completely printed.
Units — select Inches, Centimeters or Pixels.
Font — two different character styles, referred to as Normal and
Large, are available.
Rotation — you can select either 0 or 90 degrees.
A-61623 July 2008