Scanner - Basic Use Guide Table of Contents Power up PC ............................ 2 Power up scanner ........................... 2 Logon to PC ............................. 2 Starting a new job ........................... 2 Scanning Documents ........................3 Choosing Color or Black and white ....................3 •...
Mqpscan • Novell password scanmqp Kodak Capture Pro software should start automatically. If not please click on the Blue “Capture Pro” icon on the desktop. 4. Starting a new job New batch The Scanning software will open to a “batch manager” dialog box (see above). On this screen select “New”...
Next a dialog box will open. On this screen select “Ok” to continue. 5. Scanning Documents Place documents to be scanned ‘Face-down’ on the scanner. 6. Choosing Color or Black and white The default option will be whatever was used last. So please check if the document is colour or black and white and scan in the appropriate format.
Once the scan begins the software will prompt you to enter a document name(see image above). Once you have entered the desired name press “Enter’ key complete to complete. if saving to specific network location it can be left blank) (Note# This name is only applied if you do batch saving which is in a separate User Guide) 8.
FAQ’s: • What do I do if there is a paper Jam? Locate the handle marked and gently lift. Remove paper. Lift Gently replace cover; you will hear a click as it returns to its original position. Page 5 of 5...