Kodak I1400 Image Processing Manual page 27

24
Blank Image Detection — allows you to configure the scanner to not
give blank images to the scanning application.
• (none): all images are given to the scanning application.
• Based on Document Content: images will be considered blank
based on the document content within the image.
- Content amount: allows you to select the maximum amount of
content that the scanner will consider to be blank. Any image that
has more content than this value will be considered non-blank
and will be given to the scanning application. The values range
from 0 to 100 percent.
- Content amount will be filled in with the amount of content
in the preview image. If you have a representative blank
document (e.g., blank sheet with letter head), this can be used to
assist with determining the setting for Content amount (i.e.,
perform a preview scan, click this button, and adjust Content
amount as appropriate). This option is only available when there
is a preview image.
• Based on Size: images will be considered blank based on the size of
the image that would be given to the scanning application (i.e., after
all other settings have been applied).
- Final image size: allows you to select the minimum image size
that the scanner will consider to be non-blank. Any image that is
less than this value will be considered blank and will not be given
to the scanning application. The values range from 1 to 1000 KB
(1 KB equals 1024 bytes).
Color Dropout — used to eliminate a form's background so that only
the entered data is included in the electronic image (i.e., remove the
form's lines and boxes). For black and white images, these settings
effect the grayscale version of the document which the scanner
analyzes to produce that electronic image.
• Color: select the desired dropout color.
- (none)
- Red
- Green
- Blue
NOTE: For i1440 Scanners only: If you created custom dropout
colors, these colors will also be available in the Color drop-
down list.
The following options are for the Kodak i1440 Scanner only.
• Form data is color: allows you to indicate that a color other than
black or dark blue ink, was used for the data entered on the form.
A-61623 July 2008