Selecting Image
settings
6
From the main Scanner window:
1. Select a Setting Shortcut from the main Scanner window that
closely describes your desired output.
2. Select an Input document is option from the main Scanner
window.
3. Select Settings to display the Image Settings window.
4. Before making any adjustments, browse through the tabs on the
Image Settings window to get familiar with options that are
available.
5. For each option you want to use, make the appropriate selections
you want the scanner to perform when scanning.
6. If you want to see the effect your options will have:
• Place a representative document in the input tray of the scanner.
• Select Preview to perform a preview scan.
NOTE: If the images are not acceptable, you can either select a
different Setting Shortcut or continue working with the
current Setting Shortcut by reviewing each tab within the
Image Settings window again. Repeat this step as needed.
7. When finished, select Home to return to the main Scanner window
and then select Save to save your selections to the shortcut.
A-61818 April 2014