Imprinter Tab; Defining Your Print String - Kodak I1400 Image Processing Manual

Imprinter tab

Defining your print string

A-61623 July 2008
The Document Printer/Enhanced Printer operates at full scanner
speed. The printer can add a date, time, document sequential counter,
and custom messages.
The print string can be configured to include both literal (static)
information (i.e., information that stays the same for each document,
such as batch name or operator) and dynamic information (i.e.,
information that may change for each page scanned, such as the
document sequential counter). The capture software application
controls static fields; any information that the software allows you to
enter can be sent to the printer.
On — check this to enable the document printer/enhanced printer.
Format Template — the format template is used to build the print
string. The print string is what is printed on documents as they travel
through the transport. The print string is printed before the document is
scanned, therefore, it is part of the image. The maximum amount of
characters for each print string is 40 characters (including spaces).
Date — if you want to add a date to the print string, select one of the
following formats:
• Format: MMDDYYYY, DDMMYYYY, or YYYYMMDD.
• Delimiter: select one of the following separators: Slash: /,
Dash: -, Dot: . , Space or none. For example: 08/24/2008,
08-24-2008, 08.24.2008 or 08 24 2008 or 08242008 (none).
83