Troubleshooting; Printing Problems - Kodak EasyShare 300 User Manual

6

Troubleshooting

When you have questions about your photo printer, start here. Additional technical
information is available in the ReadMe file located on the Kodak EasyShare software
CD. For updates to Troubleshooting information, visit
www.kodak.com/go/photoprinters.

Printing problems

If... Try the following
IMPORTANT:
Paper does not
feed
■
(Paper light may
glow steady and
■
On/Off light may
blink)
■
1
Multiple sheets
of paper are
2
pulled through
printer
3
4
20
Use only Kodak color cartridge & paper kits for your photo
printer. Do not use inkjet paper.
The paper tray may be empty. Load paper
tray, then press the On/Off button,
Check the paper:
1
Remove the paper tray
2
Inspect the paper supply: make sure paper is not damaged in any
way, or removable tabs have not been detached. Reload with new
paper if necessary.
3
Carefully "fan" the paper to keep the sheets from sticking together.
4
Reload the paper tray. Do not exceed the fill line.
5
Re-install the paper tray, then press
Clean the paper feed roller
Remove the paper tray
Remove the paper supply from the paper tray. Carefully "fan" the paper
to keep the sheets from sticking together.
Reload the paper tray. Do not exceed the fill line.
Re-install the paper tray then press
(page
.
(page 6).
(page 18).
(page 6).
to resume printing.
www.kodak.com/go/support
5), re-install the paper
to resume printing.