Kodak EasyShare 300 User Manual page 30

Troubleshooting
If... Try the following
■
Nothing
happens when
■
you try to print
■
■
■
Nothing
happens when
you try to print
■
(from PictBridge
compatible
■
device)
■
Nothing
happens when
you try to print
■
(from computer)
■
■
■
■
24
Check the power connections
Remove the paper tray, check that paper is properly loaded, and re-install
(page 6).
If the Paper light glows steady, load paper
Make sure the color cartridge is properly installed
cartridge light glows steady, install a new cartridge.
Check the USB connections from the PictBridge compatible device to the
photo printer (page
Re-establish the connection: disconnect, then reconnect the USB cable
from the PictBridge compatible device to the photo printer.
Make sure there is at least one picture in the PictBridge compatible
device's internal memory or memory card.
Check the USB connections from the photo printer to the computer
(page 13).
Access the printer menu for your system. Remove check marks next to
Pause Printing and Offline, if checked.
Close unnecessary software applications. Disconnect then reconnect the
USB cable from the photo printer to the computer
Make sure Kodak EasyShare software is installed
necessary. If you choose Custom installation, make sure to install the
printer driver.
Uninstall, then reinstall Kodak EasyShare software
Make sure your computer meets the minimum system requirements
(page 10). Upgrade your system if necessary.
(page 2).
8).
www.kodak.com/go/support
(page 5).
(page 3). If the Color
(page 13).
(page 10). Install if
(page 10).