Advertisement
Know Your Grass Catcher
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS CATCHER.
Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study the
operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to prevent injury
to yourself and others. Save this manual for future reference.
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe
eye damage. Always wear safety glasses or eye shields before starting your tractor and while mowing.
We recommend a wide vision safety mask for over the spectacles or standard safety glasses.
UNPACKING INSTRUCTIONS
•
Remove all parts and packing materials from carton.
•
Fold flaps to inside of carton and turn carton upsidedown
on floor of work area. To protect grass catcher cover
during assembly place cover upsidedown on overturned
carton.
•
Check carton contents against list. Be sure all parts are
there.
NOTE: For ease of assembly, aside of your work area, lay out all hardware in the following groups.
Each step of the assembly instructions will identify the group needed for that step.
ASSEMBLY
LOCATION
GROUP "A"
REAR
MOUNTING
BRACKET
AND
SUPPORT
PLATE
TO
DRAW BAR
GROUP "B"
SUPPORT
POSTS
TO
COVER
ASSEMBLY
BAG OF PARTS CONTENTS
HARDWARE SHOWN ACTUAL SIZE
(2) Bolt 5/16 - 18 x 3/4
CARTON CONTENTS:
(3) Container Tops
(3) Container Bottoms
(1) Upper Chute
(1) Lower Chute
(1) Support Post
(1) Mounting Bracket
(6) Bolt 7/16 - 14 x 3/4 Self Tapping
(2) Bolt 5/16 - 18 x 2-1/4
4
(1) Mounting Support Plate
(1) Cover Assembly
(1) Cover Seal
(1) Bag of Parts
(1) Owner's Manual
(4) Locknut 5/16-18
Advertisement
