Preparation; Installation; General Notes - Mastercook 2MIE-4GLS X Instructions For Use And Maintenance Manual


All electric cords of domestic appliances near the operating hob should be kept away from the hot
burners and electric plate.

Use protective gloves when removing hot pots and pans from the hob.

Keep flammable objects away from burners.

Do not put deformed or unstable pots and pans on grates as they can overturn and flood burners.

Do not put empty pots and pans on the operating burner or electric plate.

Reduce or turn off the flame before removing pots and pans from burners.

While in use, the hob must not be left unattended. Never leave the operating device unattended
especially when frying as overheated oil or fat may ignite.

When in use, the hob will produce heat and moisture in the room in which it has been installed.
Ensure that the room is properly ventilated. Natural ventilation openings should be opened or a
mechanical ventilation device (cooker hood with extractor) should be installed.

Never use the hob to heat a room.

It is strictly forbidden to modify the hob so that it can use another type of gas or to make changes in
the electrical or gas system of the appliance
In case of a gas leakage:

immediately close the valve of the gas system or gas bottle

ventilate the room thoroughly

call gas service
During this time do not:

light matches or smoke

turn on or turn off electrical devices (radio, door bell, light) or mechanical devices that
spark.
If the gas coming out of a leaky valve of the gas bottle will ignite, put a wet blanket on the
bottle to cool it and then close the valve.
Never use the hob if its supply wire or plug is broken.
Warning !
Should you find any crack on the electric plate, immediately disconnect the hob
from the electric system and call an authorised service personnel.

1.5 PREPARATION

1. Remove all packaging items, including protective layers, from chromed elements and stainless steel
parts.
2. Wipe enamelled surfaces with a soft, damped cloth.
3. Make sure that all parts of burners are positioned correctly.
4. Before the first use, turn the electric plate ON for approx. 5 minutes by turning the knob to position
"6", exceptionally without any pot or pan. During this time the protective layer on the plate will burn
out. When the plate has cooled down, wipe the plate with a dry cloth.

2 INSTALLATION

2.1 GENERAL NOTES

Attention !
1. This hob must be installed and repaired only by an authorised fitter according to
the manufacturer's instructions.
2. Before installation, disconnect the hob from the electric supply.
INSTALLATION
DO NOT USE A DAMAGED GAS BOTTLE!
4
UK