Recording All Tracks From A Source - Pioneer PDR-609 Operating Instructions Manual

4 Getting Started
1
ANALOG
L REC BALANCE R
TEXT
CD TEXT
6
◊ÛB - >?/
SCROLL
ERASE
•
REC SYNCHRO
TIME
1
DISPLAY
GHI
/CHARA
4
SCROLL PQRS
7
MENU/
MARK
DELETE
10/0
4
CURSOR
3
1
ENTER
7
REPEAT RANDOM NAME CLIP
6
FADER PROGRAM CHECK
SKIP ID
SKIP PLAY
SET CLEAR
Downloaded From Disc-Player.com Pioneer Manuals
20
Recording all tracks
from a source
If you want to copy all the tracks from a
source, use this mode. Like the 1-track
synchro recording mode, the recorder
starts and stops automatically. When
recording from MD or CD, you can play the
source in either normal play mode, or
program play if you'd like the recorded
tracks in a different order to the original.
We do not recommend recording from a
DAT in program play mode—use the 1-
track synchro recording mode if you want
to record the tracks in a different order.
If you are recording from a noisy analog
source, such as a vinyl record, or from a
DIGITAL ANALOG
REC LEVEL REC LEVEL
source with long quiet sections, the
PUSH ENTER
recorder may not recognize the end of
MENU/
DELETE
SYNCHRO
tracks. In this case, you can still use this
Legato Link Conversion
mode, but it may be better to use manual
track numbering (see page 33).
3
1 Load a CD-R or CD-RW disc.
Check the display to make sure that there's
enough space on the disc for what you
want to record.
AUTO
TIME MONITOR
MANUAL
TRACK NO.
WRITE
AUTO INPUT
FINALIZE 2 Press INPUT SELECTOR to
MANUAL SELECTOR
choose an input.
Pressing
2
switches the active input:
Analog - Optical - Coaxial
The recorder's display indicates the current
input.
3 Make sure that the source is not
AUTO/
MANUAL
playing, then press SYNCHRO
3
ABC DEF
2 3
twice.
JKL MNO
5 6
TUV WXYZ
Press
SYNCHRO
8 9
NAME
>10
recording mode:
¢
¡
1-track sync
8
CLEAR
All-track sync
I NPUT
SELECTER
2
Î
All-track sync w/ finalization
Record-pause (no sync)
repeatedly
INPUT SELECTOR
repeatedly to change the
CD-R
SYNC–1
SYNC-1
CD-R
SYNC–ALL
SYNC
CD-R
SYNC–FINAL FINALIZE
SYNC
CD-R
O1 O1 OO:OO
Synchro recording won't work if the source
is already playing!
The recorder goes into all-sync record
pause and the indicator starts to
SYNC
blink.
SYNC–ALL
The display shows the all-track sync mode,
with the indicator blinking to show
SYNC
that recording can start.
4 Play the source.
The recorder starts recording automati-
cally.
5 After recording all tracks from
the source, the recorder goes
into record-pause.
After the recorder encounters about five
seconds of continuous silence, it assumes
the end of the source has been reached and
goes into record-pause and the display
shows the message again.
SYNC ALL
Be careful: If the recorder detects
another signal or start ID (DAT or DCC) it
will start recording again!
• The recorder will enter record-pause if
the digital signal is interrupted for
more than 5 seconds—see Digital
signal interruptions on page 18.
Press 7 to finish recording.
6
After pressing 7, the display shows
while it records the track information
REC
to the disc.
Note: If you find that synchro recording
does not seem to work, see the trouble-
shooting section on pages 40-42 for
possible remedies.
CD-R
SYNC
PMA