Recording All Tracks From A Source - Pioneer PDR-609 Operating Instructions Manual

4 Getting Started
1
DIGITAL
REC LEVEL
PUSH ENTER
ANALOG
L REC BALANCE R
MENU/
TEXT
DELETE
SYNCHRO
CD TEXT Legato Link Conversion
6 3
◊ÛB - >?/
AUTO
SCROLL TIME
MANUAL
TRACK NO.
WRITE
AUTO
ERASE FINALIZE
MANUAL
2
AUTO/
•
REC SYNCHRO
MANUAL
TIME ABC DEF
1 2 3
DISPLAY
GHI JKL MNO
/CHARA
4 5 6
SCROLL
PQRS TUV WXYZ
7 8 9
MENU/
MARK NAME
DELETE
10/0 >10
4
¢
CURSOR
3
1 ¡
ENTER
7
REPEAT RANDOM NAME CLIP
6 8
FADER PROGRAM CHECK CLEAR
NPUT I
SKIP ID
SKIP PLAY
SELECTER
SET CLEAR
Î
20
En
Recording all tracks
from a source
If you want to copy all the tracks from a
source, use this mode. Like the 1-track
synchro recording mode, the recorder
starts and stops automatically. When
recording from MD or CD, you can play the
source in either normal play mode, or
program play if you'd like the recorded
tracks in a different order to the original.
We do not recommend recording from a
DAT in program play mode—use the 1-
track synchro recording mode if you want
to record the tracks in a different order.
If you are recording from a noisy analog
source, such as a vinyl record, or from a
ANALOG
REC LEVEL
source with long quiet sections, the
recorder may not recognize the end of
tracks. In this case, you can still use this
mode, but it may be better to use manual
track numbering (see page 33).
1 Load a CD-R or CD-RW disc.
Check the display to make sure that there's
enough space on the disc for what you
want to record.
MONITOR
INPUT
2 Press INPUT SELECTOR to
SELECTOR
choose an input.
Pressing
INPUT SELECTOR
switches the active input:
Analog - Optical - Coaxial
The recorder's display indicates the current
input.
3 Make sure that the source is not
playing, then press SYNCHRO
3
twice.
Press
SYNCHRO
recording mode:
1-track sync
All-track sync
2
All-track sync w/ finalization
Record-pause (no sync)
4
5
repeatedly
6
repeatedly to change the
CD-R
SYNC–1
SYNC-1
CD-R
SYNC–ALL
SYNC
CD-R
SYNC–FINAL FINALIZE
SYNC
CD-R
O1 O1 OO:OO
Synchro recording won't work if the source
is already playing!
The recorder goes into all-sync record
pause and the indicator starts to
SYNC
blink.
CD-R
SYNC–ALL
SYNC
The display shows the all-track sync mode,
with the indicator blinking to show
SYNC
that recording can start.
Play the source.
The recorder starts recording automati-
cally.
After recording all tracks from
the source, the recorder goes
into record-pause.
After the recorder encounters about five
seconds of continuous silence, it assumes
the end of the source has been reached and
goes into record-pause and the display
shows the message again.
SYNC ALL
Be careful: If the recorder detects
another signal or start ID (DAT or DCC) it
will start recording again!
• The recorder will enter record-pause if
the digital signal is interrupted for
more than 5 seconds—see Digital
signal interruptions on page 18.
Press 7 to finish recording.
After pressing 7, the display shows
while it records the track information
REC
to the disc.
Note: If you find that synchro recording
does not seem to work, see the trouble-
shooting section on pages 40-42 for
possible remedies.
PMA