Operating Instructions; Main Power Switch & Operating Controls - Napoleon NEFV38H Installation And Operating Instructions Manual

14

5.0 OPERATING INSTRUCTIONS

Once the appliance has been plugged into a grounded electrical outlet, it is ready to operate.
EN
NOTE: Ensure the house circuit breakers for the power supply are turned on. The power supply must
be 120 Volts/ 60Hz, 15 Amps.
5.1 MAIN POWER SWITCH & OPERATING CONTROLS
The control panel is located on the left side of the appliance as illustrated.
The indicates ON / OFF. Push the
DIGITAL DISPLAY
TIMER
DECORATIVE LIGHT
HEATER
FLAME HEIGHT
POWER
POWER
FLAME & EMBER LIGHT
CONTROL
HEATER LOCK
HEATER CONTROL
TEMPERATURE SENSOR
DECORATIVE LIGHT
TIMER
DIGITAL DISPLAY
W415-1352 / 08.19.14
to turn on the appliance and the fl ame effect.
Turns the appliance ON/OFF.
Controls flame ON/OFF and the ember light colours which
cycle in the following sequence:
Orange / Blue / Purple / Cycle / Off
NOTE: When the heater is ON, the flames and embers
can not be turned OFF.
Heater button can be locked or unlocked by holding
Hold 5
for 5 seconds.
seconds
Turns the heater ON/OFF.
Hold 5 Adjusts heater to a desired temperature based on
environment. Hold for 5 seconds and wait for display to
seconds
flash. Cycle through the display value to select desired
temperature.
Display Value
C
°
Temperature
° F
Decorative light colours which auto-cycle in the following
sequence: Orange / Blue / Purple / Cycle / Off
Timer can be programed to run appliance / heater for
specific lengths of time (1hr minimum to 9hrs maximum).
Digital display of appliance functions.
NOTE: Control panel
functions operate the
same as the remote
control.
Remote Control:
0 1 2 3 4 5 6 7 8 9 N
18 19 20 21 22 23 24 25 26 27 ON
64 66 68 70 72 74 76 78 80 82 ON