Zero Configuration Setup - D-Link DCS-7000L User Manual

Section 2: Installation
If you have a D-Link Cloud Router, you can take advantage of Zero Configuration. Zero Configuration automatically configures
your camera's settings for you, and adds it to your mydlink account automatically. This type of setup allows you to set up your
camera by simply plugging it in and connecting it to your router.
Connect your camera to your mydlink enabled cloud router and Zero Configuration will automatically configure your
DCS-7000L and automatically add the camera to your mydlink account. You can now remotely access your camera from the
mydlink.com website to manage and monitor your DCS-7000L.
Connect the Ethernet Cable
If using an Ethernet connection: Connect the included Ethernet cable to the
Ethernet port located on the back of the DCS-7000L and connect it to your router.
Attach the External Power Supply
Attach the external power supply to the DC Power receptor located on the rear
panel of the DCS-7000L and connect it to your wall outlet or power strip.
D-Link DCS-7000L User Manual

Zero Configuration Setup

12